AcuDew, the new addition to the range of SHAW dewpoint transmitters.
This 2-wire, loop powered transmitter, with linear 4-20 mA signal, transmits to a control system of distances up to 1,000 metres (3,280 feet) without any loss of signal.
The dew point range of the AcuDew covers an overall dew point of -120 °C to +20 °C (-184 °F to +68 °F). Various dewpoint ranges are available within this span and colour coded accordingly for easy reference.
Configure the output unit to your choice of selectable engineering unit. A quick and simple process. Choose from °C dewpoint, °F dewpoint, ppm(v), ppb(v), g/m³ and lb/MMSCF. Shaw Moisture Meters will configure your transmitter in their calibration laboratory.
The AcuDew provides a protection rating of IP66 (NEMA 4X). Manufactured using robust stainless steel construction methods and tested to withstand 35,000kPA (350bar) maximum pressure. The transmitter uses a cable with a secure 5 pin M12 connector. The specially selected connector and cable reduces the time required for installation and maintenance of wiring systems.
This dewpoint transmitter incorporates the AutoCal function as standard. Thereby, allowing users to check the span of the instrument and correct any deviation between annual laboratory calibrations.
The AcuDew is fully compatible with the newest range of single channel displays. Choose from the AcuLoop, AcuVu and AcuTrak. The AcuLoop plug in signal indicator is suitable for local display. The panel mount AcuVu with 4-20 mA retransmission includes fully programmable alarms. The panel mount AcuTrak incorporates additional onboard pressure dew point calculations and RS485 communications.
The AcuDew dew point transmitter is also suitable for use with various sample systems such as the existing SU4 sample system and SWS sample system . Shaw Moisture Meters design a standard range of sample systems to cater for most applications. However, if your requirements vary, our technical team is happy to advise and custom design a system specifically for your application.
Easy to install, easy to operate. The reliable and accurate AcuDew dewpoint transmitter requires little or no maintenance.
Various dewpoint ranges are available, covering an overall range from -120 °C to +20 °C dewpoint (-184 °F to +68 °F). The 4-20 mA output of the dewpoint transmitter is configurable in °C dewpoint, °F dewpoint, ppm(v), g/m³ and lb/MMSCF.
The incorporated advanced electronics derive power from the 7-28 V DC non isolated power source and configured to output a linear, isolated, 4-20 mA signal for distances up to 1,000 metres. Due to the development of the sensing technology, design and construction of the transmitter, SHAW dewpoint transmitters can cope with extreme environmental conditions.
The SDT-Ex dewpoint transmitter is certified intrinsically safe to ATEX standards and includes CE and UKCA approvals. This dewpoint transmitter is suitable for use in hazardous areas, when operated with a signal isolator.
Designed, with the operator in mind for reliable and accurate trace moisture measurements. The AcuDew and SDT-Ex are extremely easy to install and operate, requiring little or no maintenance.